Wuhan Sintec Optronics Co., Ltd,
One-stop Shop for Optics, Lasers, Machines & Parts
Add to Cart
| Part number | Max entrance dia. mm | Control | DC power supply, V | Dimension LxWxH,mm |
| LSRM-1064-6-QPT | 6 | XY2-100 | 15 | 254x97x105 |
| LSRM-1064-7.2-QPT | 7.2 | XY2-100 | 15 | 254x97x105 |
| LSRM-1064-8.4-QPT | 8.4 | XY2-100 | 15 | 254x97x105 |
| LSRM-532-3.3-QPT | 3.3 | XY2-100 | 15 | 274x109x116 |
| LSRM-532-4-QPT | 4 | XY2-100 | 15 | 274x109x116 |
| LSRM-532-4.6-QPT | 4.6 | XY2-100 | 15 | 274x109x116 |
| LSRM-xxxx-QP20 | XY2-100 | 15 | 350x140x188 | |
| LSRM-xxxx-QP30 | XY2-100 | 15 | 400x155x194 |
(Refer to LSRM-Q datasheets for 2D marking heads)
This solution includes a 2D galvoscanner system LSRM-Q Series, a dynamic focusing unit Proton Series, F-theta lens and a galvo system controller LSRM-UMC4. It uses the post-objective scanning technology, the working volume is about 150*150*45 with the FL 210mm F-theta lens. The advantages are fast marking speed, small focal spot and low power loss.
| Laser type | Nd:YAG | Nd:YAG doubled |
| Wavelength | 1064nm | 532nm |
| Beam expansion factor | 1.67 | 3 |
| Input aperture | 6mm/7.2mm/8.4mm | 3.3mm/4mm/4.6mm |
| Scan head apertures | 10/12/14mm | 10/12/14mm |
| Focus range in Z-direction | ±22.5mm (1) | ±2.5mm (2) |
| Tracking error time | 700us | 700us |
| Dimension | 254x97x105mm | 274x109x116mm |
| Remarkds: (1) The focal length of the f-theta lens is 210mm; (2) The focal length of the f-theta lens is 100mm. All the above parameters are theoretical. | ||
(Refer to LSRM-Q10/12/14 datasheet for 2D marking heads)
LSRM-QP20/30: 3D Pre-Scanning Solution includes a 2D galvoscanner system LSRM-Q, a dynamic focus unit Proton series, and a galvo system controller LSRM-UMC4. It uses the Pre-Objective Scanning technology to realize the large field and 3D laser application. The advantage of this system: fast, small focal spot, small power loss.
| Scanning field | 600x600mm | 800x800mm |
| Focal spot diameter | 364um | 487um |
| Working distance | 502mm | 777mm |
| Resolution | 9um | 12um |
| Scanning field | 400x400mm | 600x600mm | 800x800mm |
| Focal spot diameter | |||
| QP-20 | 34um | 52um | — |
| QP-30 | - | 36um | 48um |
| Working distance | |||
| QP-20 | 502mm | 777mm | — |
| QP-30 | - | 777mm | 1051mm |
| Resolution | 6um | 9um | 12um |
| Scanning field | 400x400mm | 600x600mm |
| Focal spot diameter | 17um | 26um |
| Working distance | 520mm | 795mm |
| Resolution | 6um | 9um |
All of the above parameters are theoretical values.
Distance between edge of deflection unit and working surface. This distance is dependent on the product model and will vary with laser pergence and objective tolerance.
Actual spot size and writing speed are dependent on material and application.ine submission